Smith Wesson Serial Number Chart

Since newly released operating systems always carry a risk of introducing unforeseen difficulties.We do not recommend updating to OS X 10.11 El Capitan until your product is listed as compatible here on this article.Hardware SupportAlready Supported. M-audio ozonic driver mac os x.

• S&w Dates Of Manufacture By Serial Number
• Smith And Wesson K Frame Serial Number Chart

Manufacture Year by Serial Number 'K' Frame Revolvers - 1899 to 1983: (Years/Serial. Smith & Wesson M&P Revolver - Model 10 updated their status.

MediaTek MT7601U is a highly integrated Wi-Fi single chip that's fully compliant with 802.11b/g/n standards (150Mbit/s PHY), offering feature-rich, reliable and cost-effective wireless connectivity from an extended distance.Its optimized RF architecture and baseband algorithms provide superb performance and low power consumption. Mediatek chipset download for android. An intelligent MAC design deploys a highly efficient DMA engine and hardware data processing accelerators that offloads the host processor.The MT7601U is designed to support standards based features in the areas of security, quality of service and international regulations, giving end users the greatest performance any time and in any circumstance.

1. SmithandWessonForums.com is not affiliated with Smith & Wesson. We are an enthusiast site and fans of Smith & Wesson Firearms. To visit the official Smith & Wesson site, click here: Smith-Wesson.com.
2. Smith and Wesson Serial Numbers. This is a discussion on Smith and Wesson Serial Numbers within the Defensive Carry Guns forums, part of the Defensive Carry Discussions category; Ok, well, not literally EVERYONE!.

After the Second World War, S&W began using one-letter prefixes on several models of revolvers. This practice was kick-started in April, 1942, when they ran out of numbers for the prewar .38 Military & Police revolvers and production had shifted to the wartime effort of providing military revolvers to the U.S. and UK armed forces. Free pdf editor for mac.

https://tariocorsum.tistory.com/2. If in case you have any favorite free sheet music sites you like that you do not see in this list, let me learn about them within the comments beneath.

This was the beginning of the ‘V’ (for Victory) prefix. Almost a million of these .38 caliber revolvers were made during the 1942-1945 period. Near the end of that run, an internal change was made in the lockworks, which was designated by an ‘S’. So late war Victory models had an ‘SV’ prefix. When the war ended and civilian production picked up again, the postwar Military & Police revolvers got a simple ‘S’ prefix until the Victory number series ran out. (By “ran out,” I mean they reached 999,999. S&W had a policy of never going to more than 6 numeric digits in a serial number sequence.)

So, in March, 1948, the company needed a new letter prefix for the .38 Military & Police line. The ‘C’ was chosen for this purpose. No one seems to know why it was a ‘C’ and not some other letter, but ‘K’ had already been chosen for the target K frame series and ‘C’ apparently seemed a logical choice for the fixed sight K frame guns. The ‘C’ prefix remained in use for those revolvers until C999999 was reached at the end of 1967. It was replaced with a ‘D’ prefix in 1968.

Free American History Audio Books, MP3 Downloads, and Videos. Browse our directory of free American History audio & video titles including free audio books,. American history audio books free download.

S&w Dates Of Manufacture By Serial Number

Meanwhile, N frame revolvers were given an ‘S’ prefix for the serial sequence. There was no conflict with the ‘S’ prefix assigned to fixed sight K frame guns because the N frame numbers were much lower, continuing a number sequence for prewar N frame guns that did not have a prefix. The ‘S’ numbers on N frame guns lasted until late 1969, when they were discontinued at S333454 and were replaced with ‘N’ prefixes, beginning with N1.

Small frame revolvers - I frame and J frame - did not have a letter prefix in the serial number until 1969. By then, the I frame had been completely phased out and all small frame revolvers were built on the J frame. At that time, they were assigned a ‘J’ prefix, which, with variations, remained in use until 1983.

In 1983, the discreet serial prefixes were discarded in favor of a scheme that was common to all S&W revolvers, regardless of frame size or caliber. Denver co auto tune up. This new number scheme used three letters and four numeric digits. This practice is still in use.

Youtube; Monica - Why I Love You So Much (Official Video) download Monica - Why I Love You So Much download Monica- Why I Love You So Much Lyrical. Check out Why I Love You So Much by Monica on Amazon Music. Stream ad-free or purchase CD's and MP3s now on Amazon.com. Add to MP3 Cart. Watch the video for Why I Love You so Much from Monica's Miss Thang for free, and see the artwork, lyrics and similar artists. Monica why i love you so much free mp3 download for windows. Download the song of Monica — Why I Love You so Much, listen to the track, watch. Bitrate 320kbit/s. Size 10.83 MB. Duration 4:30. Download a song.

Dustin hoffman teaches acting download torrent full. 21 Auditions Dustin has spent his career defying “leading man” stereotypes. Here’s how to take the right risks to set yourself apart from the crowd and handle the rejection all actors face. Nanoleaf app for mac.

The key point to remember for Gun Values Board queries is that if your S&W revolver has a letter in front of the serial number, that letter is part of the number. When posting a S&W serial number in a quest for a shipping date, do not fail to include the letter. If you leave it out, we will most likely misidentify your revolver and will not be able to accurately estimate the year it left the factory.

It unites the several tools which are malware-fighting an app. The REAPER license key is meant to use with big sorts of applications in your mind. Malwarebytes blocks the virus and infected websites from your PC which makes your computer infected. Malwarebytes Anti-Malware Licence Keys FJKSD-FDKJS-FJORDS-DFKSDJ-FDKDJSDFJK-DFJKD-DFJKDE-FKDJEI-DFKJDIEDFJKDFIR-DFJKDFI-DFJKDFIR-DFJKDFFJKFDI4-FJKDFI-DFJKDFI4-FDKJDFI4DFJKFD-FGJKD-FGJKDFIR-FGJKDFGIFDFJKDF-DFJDJE-DFJKDFIE-DFJKDFDFI48U-FJKDIEJ-DFJDIEJ-DFJKDIEJMalwarebytes Anti-Malware 4.0.2.44 Beta Crack Licence Key crucial is used In nearly all the anti-virus tool. The rate of scan is four times greater than every other apparatus that’s anti-malware. Malwarebyte for mac.

So. what do you think? Please leave me a comment.

https://tariocorsum.tistory.com/7. Download Free Proxy today and see what it can do for you? With so much personal information on the internet these are precautions that will be getting more and more common.

JPinAK isa scholar administrator and an all time top contributor at Gun Values Board.

This Might Interest You

92 Comments:

Smith And Wesson K Frame Serial Number Chart

• Vale:If the current serial numbers don’t distinguish between revolvers, is there another way to tell which revolver someone has if they don’t post a photo?
• JP@AK:Yes, Vale. The model number is stamped in the yoke area on the frame. This has been the case for virtually all S&W revolvers since sometime in 1958 (the exact date varies by model).
• Lance:I have a S&w 38 special US Service CTG #B32420 under grip and bbl frame. When you lower cylinder the number stamped there reads G2597
  What year is this?
• JP@AK:Hi Lance
  Please re-post this as a question on the S&W forum, here:
  http://www.gunvaluesboard.com/smith-wesson/
  Just click on the Ask a Question box and the use the text box to ask your question. The B 'prefix' should only appear on the bottom of the barrel, if this is a S&W revolver. It indicates the gun shipped originally with a blued finish. The G number is meaningless.
  JP
• discover:Good history
• Thom:Thanks very much for the information on the S&W .38 Revolver. You were very helpful.
• J T:S&W serial prefix post was quite helpful. Figure my .38 Special with 4 in. barrel made circa 1947.
  Thanks.
• winchester94:S&W 19-3 # TR207 (set) 80% good, I think. What should I take for it ? Best guess?
• Vale:Winchester94, I recommend posting your question in the forum along with some images! http://www.gunvaluesboard.com/smith-wesson/
• JP@AK:Hi Winchester94
  Vale is correct. A blog is not the place to ask specific questions about a particular gun. Please repost this information over in the S&W category. I’ll be glad to help you there.
  JP
• Bill:I have one with 4 digit serial what can anyone tell me
• RobertcHemingway:I’m did not take a picture of the serial number, but it does have U.S. Navy stamped on it. It was issued to my dad during the hight of the way with Japan. He said he had yo carry it ( shoulder holster) still has a few tracer bullets left. So I’m sure it has the V prefix.
• Rob:What does anyone know about s Winchester model 21 shotgun double barrel in case for 2. Only 1 gun hardly used.
• george:trying to determine frame on my 686 do the letters with serial number tell that my serial number has BFL starting before numbers
• JP@AK:George
  The serial number in this case tells you nothing about the frame size. However, the Model 686 was built on the L frame, a size introduced in 1980. Your serial number would date the gun to about 1990.
• Charlie:I have a S&W .38 with serial number on handle butt of V625505. I’m assuming it was made during the war - is there anything more specific that I can learn? Thanks.
• JP@AK:Yes, Charlie, it is a wartime revolver and we can provide further information. However, the blog section is not the place to discuss individual firearms. Please go to the S&W category on the GVB and post your question there. Include photos if possible.
  Here is a link you can use:
  http://www.gunvaluesboard.com/smith-wesson/
  Follow the link and then click the yellow 'Ask a Question' button.
  JP
• Bill Miners:The serial number on my S & W 38 special is C 345578. I think it was manufactured in the early to mid 50’s. Does anyone have a better feel for when it was made?
• JP@AK:Hi Bill
  A blog comment is not the proper place for questions on the GVB about specific firearms. Please re-post your question in the S&W category. Just click the link below and then click the yellow 'Ask a Question' box within the S&W forum. I’ll be happy to address it there.
  http://www.gunvaluesboard.com/smith-wesson/
  Thanks,
  JP
• David Drake:Great information. I have a S&W 38 Sp. CTG with a SV number (SV 772xxx) trying to date it. You were the only reference i found with the SV stated. However it is a 3 screw fixed sight revolver (M&P?) which still is baffling me. However still researching. If you can offer a suggestion or approximate date it would be helpful. More info: has model number - when cylinder is open there are 2 different numbers and the cylinder has a different number, likely part numbers. To me it may be a salvaged re-manufactured revolver. Thanks
  David
• JP@AK:David
  Your .38 Military & Police revolver, with serial number SV772xxx, could have left the factory any time between about December, 1945, and April, 1946. It mostly depends on where it went. Some revolvers in this serial range went to the U.S. Navy and most of those shipped in December, ‘45 or January, ‘46. Those that went to civilian distributors left later, many in March, 1946. This was sort of a 'transition' period between military shipments and the resumption of civilian arms production.
  Your revolver will have a 5 screw frame, not 3. You have to know where to look to find the other two screws.
  That is more information than I normally would have provided in a blog post response. The proper place for asking questions is on the forum, not in the blog section. If you want to post some pictures and ask further about your revolver, please go here:
  http://www.gunvaluesboard.com/smith-wesson/
  It also would help a lot if you post the complete serial number. Photos would be a huge help, especially if you show the top of the gun, above the cylinder.
  JP
• Jack Wilson:Would appreciate any info regarding a S&W model 31-1 in .32 S&W Long. 3' barrel. Serial No - H143xxx. My dad passed away last year, and this was his nightstand gun. He bought it in 1982 and fired only 6 rounds through it. I have the box and all the papers.
• Dennis Chandler:My J frame revolver serial number is 69037. It is stamped on the inside frame butt above where the grip halves meet. The same number is stamped on the cylinder. The barrel length is 4' from the cylinder to the end. It is a 5 shot with a diamond surrounding the grip mounting screw. Is there a specific model number associated with this revolver? Thank you. Dennis Chandler
• JP@AK:Dennis
  Unfortunately, a blog post is not the best place to ask about a specific revolver. Please go to the S&W forum category here at the GVB and repost your question. I’ll be glad to deal with it there.
  Be sure to include the caliber marking from the barrel. If it is a .38 Special, then it is truly a J frame. If not, it may be an I frame, which was the predecessor to the J. Most I frame revolvers were not changed to the slightly larger J frame until the early 1960s.
  Here is a link to the correct category for your question:
  http://www.gunvaluesboard.com/smith-wesson/
  Post pictures if you can. That will usually help quite a bit in making an identification.
  JP
• JP@AK:Jack Wilson
  As I told Dennis, you need to ask your question here:
  http://www.gunvaluesboard.com/smith-wesson/
  I’ll be glad to help you on the forum.
  JP
• Chris:Hello I have a j frame model 49 with serial number 394jxx, and wondering how old is it? Any help would be appreciated
• JP@AK:Chris
  We ask that you post your questions about individual firearms on the regular forum, not here in the comments on a blog.
  Use the following link and then click on the yellow Ask a Question button.
  http://www.gunvaluesboard.com/smith-wesson/
  Thanks,
  JP
• OldNavy:JP@AK- I like the picture of the Smith at the beginning of the article.
  Also, the information on the Smith Serial numbers.
  I am still looking and have Not bought my last Smith pistol yet.
  OldNavy
• Wayne:Why does any info on questions regarding serial numbers, always say to ***** the last three digits? Is this just personal or non-pertinent?
  I guess I’m really asking.what do they represent?
• JP@AK:Paranoia in most cases. Many people have the idea that if they post a complete serial number, someone will be able to use it to steal their guns. But no one has ever been able to document any instance where this has actually happened.
  For identification purposes, it is much, much better to provide the complete serial number. In the case of S&W handguns (and Winchester rifles, too), the factory can determine exactly what day, month and year a particular gun left the factory (I think with Winchesters it is the date it was serialized in the polishing room). But unless someone provides all the letters and digits in the serial number, this cannot be done.
• Wayne:Thank you JP@AK. I got the info I was looking for by the 2K65 part of the number on my model 66 (S&W), made in ‘71. Took a while but I got it. I was just curious as to why the paranoia of the last three digits.
  Thanks again,
  Wayne
• JP@AK:Hi Wayne
  Glad you got it figured out.
  If your Model 66 serial number is 2K65000 (or higher), it would be from 1972. The 2K numbers from 1971 stopped at 2K55996. This illustrates the problem of not getting the entire number. :)
  JP
• Wayne:Yes, I saw that after I posted. I was writing from memory & that’s.well, not what it used to be. I figured you would catch it so I let it go. Glad you did.
  The whole number is 2K65927, which is well within the 1972 range. Do the last three indicate the production number or just part of the date code?
  Regards,
  Wayne
• JP@AK:'Do the last three indicate the production number or just part of the date code?'
  There really isn’t a 'date code' like you have with, say, Marlin. S&W used various serial sequences on different model groups. In the case of the K series, it was used on postwar target model K frames (K-38, .38 Combat Masterpiece, Model 66 etc.). They were more or less issued in numerical order, but there were exceptions because batches of numbers were assigned to individual models. For example K270000-K295000 might be set aside for the K-38, while K295001-K325000 might be designated for the Combat Magnum. If a run of Combat Magnums was scheduled for assembly before a run of K-38 Masterpieces, the higher numbers might be used first. (That is an off-the-cuff example and likely isn’t accurate.)
  In the case of your number, 2K65927 would probably have been used just after 2K65926 and just before 2K65928, so it reveals a sequence. It has nothing to do with dates.
  To further illustrate the matter (and these are actual numbers), in 1972 2K55997 through 2K99999 were used. But so were 4K1 through 4K1627 and 3K31280 through 5K6616. Then, in 1973, 4K1628 through 4K54104 and 5K6617 through 5K73962 were used. Then, in 1974, 4K54105 through 4K99999 were used, along with 5K73963 through 6K58917. So the 4K numbers were used in three different years, but in sequence. And so on. Lots of overlap and it was partly because of the batch system for different models, together with production quotas for each those models. Production quotas for each model were established largely by demand projections.
  I hope all this makes sense.
• Wayne:It did right before you said, 'To further illustrate.', but that’s okay, I get the idea & now I know it’s just sequential so I’m satisfied.
  Thank you for the great information. You have helped me to understand a lot better than I did & I saved this for future reference. Again, thank you.
  Wayne
• JP@AK:

  Happy to help. Sorry I got carried away . . . :)

• Wayne:No worries. I do it all the time. Lol.
  Sorry to be such a pain in the butt.BUT (pun intended) it is appreciated.
• Mike Speck:Thank you, that was the information I was looking for! If I sent you a picture and serial number could you please give me a estimate of the value?
• JP@AK:Hi Mike
  I’d be happy to help, but not here in the blog comments section. That is not what this part of the GVB is for.
  Go to the S&W section and post your pictures, serial number and question there. Here is a link:
  http://www.gunvaluesboard.com/smith-wesson/
  JP
• Daniel Daneman:the # on my .357 is BBA 1555 could you tell me the age & model number of this revolver? also there is a # on the inside of the revolver 56 22 it is a six shooter with a 2.5' barrel, it is in excellent condition & would also like to know it’s value?
• JP@AK:Hi Daniel Daneman
  I’d be happy to help, but not here in the blog comments section. That is not what this part of the GVB is for.
  It sounds like you have a Model 19-5 Combat Magnum.
  Go to the S&W section and post your question there. Please include your serial number and pictures if you can. Here is a link:
  http://www.gunvaluesboard.com/smith-wesson/
  JP
• Thomas Gilbert:Great information regarding Smiths. I will be sending you some information shortly regarding a WW2 era Victory in 38 spl which is a little confusing to me because of what it doesn’t have for factory markings and different finish for a Victory. Will send it out tomorrow for your comments.
  Thanks
• Roger:What about the letter R in the beginning of a serial number?
• JP@AK:Hi Roger
  Beginning in 1969, the R prefix was used on three J frame models: 32, 33 and 60. Much later, it was briefly used on the .22/32 Magnum Kit Gun Stainless, Model 651.
• Roger:I have a mod 37 with a r in the serial number
• JP@AK:Roger
  That would be very strange. The Model 37 Chiefs Special Airweight started in the early J frame sequence with no prefix. In 1969, it started getting the J prefix, which lasted until c. 1983-84 when all S&W revolvers transitioned to the three-alpha four numeric sequence. No Model 37 should have an R prefix.
• JP@AK:Go to the regular Smith & Wesson section of this website. Click on the 'New' drop down menu in the upper right corner. Select 'New Topic.'
  In the text box, write whatever information you want to convey. Then click on 'Attach Photos.' You will get six slots to 'Choose File.' Click on one of them and select a photo from your home device. Repeat as necessary. When you are finished, click on 'Submit.'
  Here is a link to get you started:
  http://www.gunvaluesboard.com/smith-wesson/
• Mike.:I have a model 3 (I believe). Seriel number is 304717. Can you help me identify when made.
• JP@AK:Hi Mike
  A blog comment is not the best place to address your question. Please post your information and question in the S&W category here on the GVB. Include pictures if possible. I’ll do my best to assist you.
  Here’s the link:
  http://www.gunvaluesboard.com/smith-wesson/
• Jeff:Do any of the Smith serial numbers repeat? I have a model 686-3 and was wondering if there could be a duplicate serial number from Smith. I realize this would defeat the purpose of serial numbers but I figured I’d ask.
  Thanks in advance
• JP@AK:Before 1968 there were lots of duplicate serial number. However, the 1968 Gun Control Act required every firearm made in the U.S. to have a unique serial number. Since the L frame guns were not made prior to 1980, your Model 686 would have a unique serial number.
• Hugh:My S&W 32 cal. Long model RG. 31 is in fair to good condition. What year was it made and what is it worth..serial number Q106416. Your thoughts
• kenny:I have a smith Wesson mod 29 no dashes just plain 29 per# starts with s 185005 can you tell the date of man on this I’m thinking in late 50s
• JP@AK:Hi Kenny
  The blog comment section isn’t the best place to ask a question about a specific gun. I’d be happy to provide information on your .44 Magnum, but I would appreciate it if you would post this same question on the general forum under the S&W category. Here’s a link:
  http://www.gunvaluesboard.com/smith-wesson/
  Thank you!
  JP
• D baker:First time I’ve seen this side looks like to me it’s great information I will try to remember it and get back with some of the questions that I have or answers that may help somebody else Cyril numbers and information on all these guns can be found in the standard catalog of Smith and Wesson both volumes one and two by now there maybe be at three out
• JP@AK:D Baker
  The Fourth Edition was released late last year. Available on Amazon.
  JP
• Rickyj:What of a serial number beginning wit a number then a letter. i.e. 8K32099.
  FYI
  I’m researching a pistol with that serial number for possible purchase
• JP@AK:Ricky
  We ask that you not post specific questions about a specific gun in the comment section of a blog. Those sorts of questions belong in the forum categories for each make of firearm.
  As it turns out, you did ask about this gun elsewhere and I have just posted an answer for you.
  Here is a link:
  http://www.gunvaluesboard.com/sw-model-16-584034.html
• Dwayne:I inherited a Smith & Wesson 38 special 6′’ barrel and adjustable sights
  S/N 6533xx
  when was it made?
  7
• painthorse4530:What is my 38 S.& W SPL Stainless steel. 5 shot revolver worth ? The serial number is R61006 ..Best Regards, Painthorse
• Bob Riley:My S&W serial number is D690XXX. Can you tell me more about this?
• Violet Smith:I have a 38c Smith and Wesson, 5 shot, serial number 100621, Can you tell me the age?
• Bob S.:Need help just got a 44 mag Classic DX 8 3/8 inch. S# GXR4222. Mod 629-3. Can you tell me when it was made and any other information?
• Pre 1942 S&W 6 shot double action revolver:I believe I have a pre1942 Smith and Wesson double shot revolver. I inherited it when my grandmother died. She inherited it from her sister who lived to be 99. It doesn’t appear to have ever been shot and has what I blueberry are Bakelite handles. The number starts with a 3. Any ideas about my gun as far as age or value?
• JPinAK:Hi 'Pre 1942'
  Three matters here:
  1. A blog comment isn’t the right place to get details on a particular gun. For that, please post your question here:
  https://www.gunvaluesboard.com/smith-wesson/
  2. You will have to provide quite a bit more information about your grandmother’s gun. What you wrote here is insufficient for us to determine what it is. At the very least we need the complete serial number. 'Starts with a 3' is no help at all. Pictures would be worth a lot in identifying it.
  3. The 'handles' are not Bakelite. They are black hard rubber; Gutta Percha, to be exact.
• Rusty:Would like to know date of manufacture on my model 19 serial # 7K977xx
• JPinAK:Rusty
  Please post your question here:
  https://www.gunvaluesboard.com/smith-wesson/
  Blog comments are not the appropriate place to ask questions about particular guns. Those are answered on the forum under the related manufacturer’s name.
  Thanks for visiting the Gun Values Board. We are happy to help when we can.
  JP
• James:So my S&W snub nosed .38 Cal revolver without a covered cylinder spindle, ser #S925819 was produced between 1944 and 1946 for police use. Would this be a model 10 even though the barrel length is only 2¼' from the cyl face to the end of the barrel?
• JPinAK:James
  Please post your question here:
  https://www.gunvaluesboard.com/smith-wesson/
  I’d be happy to provided information on your postwar Military & Police revolver at that location.
  We don’t answer questions about specific guns in the comments section of blog posts. The blog area is for offering general information only.
  JP
• Paul Walker:My revolver has c 164 464 on butt. Can you tell me anything about it. It is a S & W, 38 SPC, 2 IN BARRELL. 6 shot.
• JPinAK:Paul
  We don’t answer specific questions about particular guns in this part of the GVB. See the two posts just above yours. Please post your question here:
  https://www.gunvaluesboard.com/smith-wesson/
  I’ll be happy to respond when your post shows up in the S&W category.
  JP
• Ricster1077:I have a S&W .38 snub nose with a grip safety. Serial number F 4 728. I am wondering what year it was made.
• JPinAK:

  Ricster1077 We don’t answer specific questions about particular guns in this part of the GVB. See the posts just above yours. Please post your question here: https://www.gunvaluesboard.com/smith-wesson/ I’ll be happy to respond when your post shows up in the S&W category. BTW - F 4 728 is not a S&W serial number, but we can discuss that when you post your question in the main S&W category. JP

• Babalu50:I have a S&W .38 Special CTG tjis one was issued to the Ohio Highway Patrol. I was wondering what is worth anyone has an idea? It works as it should , no issues , somewhat scratch here and their due to probably the holster but nothing that interfere with it working , I just want my money back it was giving o me by a good friend all and it’s all clean to we both have CCW’s , but I just want my $$ back I also got a Ruger .357 Mag stainless (Security Six ) also was issued to the Ohio Highway Patrol there both very very nice guns. if anyone knows what I could get cash for them let me know.
• JPinAK:Roy Houdyshell
  Please post your question here:
  https://www.gunvaluesboard.com/smith-wesson/
  The blog comments section of GVB is not the place for getting information on specific firearms.
  JP
• roy houdyshell:i have as&w model 64 with serial number beginning with bkr what yer was it made
• JPinAK:roy houdyshell
  I think you didn’t carefully read what I posted previously. We don’t answer such questions in the comment section of blog posts.
  Please - go to the link provided above and post your question there.
  JP, Administrator
• Kelly:I have a Smith & Wesson <phone> patent dates with no trigger guard. Serial number 4708. Looking for any information please.
• JPinAK:Kelly
  You properly posted this question in the S&W section of the GVB. I just replied with some information. You can go there to see my answer.
  JP
• Jim Frazier:Have S&W 22 LR CTG with Serial #K47631.
  Trying to determine year/value.
  Thanks
• JPinAK:Jim
  Please post your question (with photos, if possible) in the S&W section of the GVB. Here is a link:
  https://www.gunvaluesboard.com/smith-wesson/
  We don’t answer questions about specific guns in the comment portion of blog posts. That is not their purpose. I’d be happy to reply with information on your K-22 Masterpiece in the proper place.
  Regards,
  JP
• mroboid:Your detailed information is what personally like. I’m new at learning of the type of revolver I have.
  I put in its alphanumeric info and I found you.
  Thank you for satisfying my curiosity.
  Lee in Arizona
• JPinAK:1972.